Roller Chain Conveyor Sizes: 6-3, 9-4 and 9-5

Equipment Solutions For The Recycling Industry

A roller chain model code gives two numbers. The first is the pitch, the space between wheels. The second is the roller size.

So an RC 6-3 has a 3 inch wheel every 6 inches. An RC 9-4 has a 4 inch wheel every 9 inches.

The three standard sizes

  • RC 6-3. A 1/4 inch side bar rated 4,650 lbs per strand. Built for lighter material at faster speeds.
  • RC 9-4. A 3/8 inch side bar rated 9,200 lbs per strand. Built for heavier material at slower speeds. It is about half of what we build.
  • RC 9-5. A 1/2 inch side bar rated 12,700 lbs per strand. The heaviest duty of the three.

Custom options are available on request.

How to pick a size

If your material is very heavy, start at a 9-4. If you need to run fast, start at a 6-3. If you want the heaviest duty we build, go to a 9-5.

Still not sure? Most buyers do not need to pick. Tell us the machine and the material, and we size it.

Shafts

Every shaft is 2 15/16 inch at minimum. We also build with 3 7/16, 3 15/16, 4 7/16 and 4 15/16 inch shafts.

Two things call for a bigger shaft: heavier material and a wider machine. Heavier loads need more torque from the drive. A wider belt means a longer shaft, so it has to be thicker to keep from bending.

Bearings

The head shaft runs type SCM pillow block ball bearings. The tail shaft runs type SCM wide slot take-up bearings. Type E tapered roller bearings and expansion bearings are available too.

Not sure which size you need?

Tell us the machine and the material. We will size the chain, shafts and bearings for you.