Slider Bed Conveyor

Product Description

Standard slider bed conveyors ship with two e-stop buttons and protective guards up to 8 feet above the ground. Conveyors use a shaft mounted, inverter rated motor and gear reducer. Conveyors are designed to run at a nominal speed of 40 FPM, unless otherwise noted. Conveyors include adjustable supports even if they are not visible on the preliminary drawing(s).


Product Video
Factor of Safety
OSHA Compliant
Sizes
Custom Made Per Each Application
Lead Time
12-14 Weeks Depending on Current Workload
Frame
The frame is built from formed sheet steel between 10 gauge to ¼” thick. The frame is welded & cross-braced with angle for rigidity. Lifting lugs are mounted on conveyor sides for ease of installation.
Belt
Typical belts are standard high abrasion resistant belting. 2 ply flat belts, linings are high tension synthetic fabric resistant to mildew and rot.
Drive
Motors are TEFC rated 230/460 volts, 3 Phase, 60 Hz. Reducers are helical bevel shaft mounted with torque stabilizer arm.
Safety
Expanded metal guards are provided 8’ from grade and any area designed for high personnel traffic. E-Stop buttons will be provided unless in an area where there is a continued presence of personnel, such a sort platform, where cable switch stops will be provided instead. All stops come with mounting hardware.
Paint
Conveyors are finished with one coat of KWS Blue industrial enamel, to a minimum of 2½ mils DFT. Metal surface prep is a SSPC – SP3 minimum, other colors available upon request. All welding procedures follow the AWS section D1.1 guide lines.